• THEIPA Point
  • Bolt-on attachment swivel, ball bearing
  • THEIPA Point-F
  • THEIPA Point-S
  • ENORM Flat Point
  • Attachment-point, weld-on type
  • Attachment-point, weld-on type - edge fastening
  • Attachment-point, bolt-on type
  • Attachment-point, bolt-on type

THEIPA Logo

The new generation of attachment swivels THEIPA Point with WLL up to 20 †.

By utilising the technological characteristics of our ENORM material, even in this heavy-duy area, we have again succeeded in increasing the WLL of the new THEIPA Point attachment swivel.
The result is a reduction in weight of approximately 50% to the old TAWGK 20.

NEW: all the new THEIPA Points starting with a norminal size 8† (TP 8) have a mechanically designed labyrinth seal. This reduces ingress of dirt and moisture and therefor prolongs lifetime.

NEW: the galvanizing of all new THEIPA Points is free of CHROME 6. This means that we fulfill the EC-directive 2000/53/EC.

Operating Instruction Downloads (pdfs)

Attachment swivels THEIPA-POINT(TP), THEIPA-Point-S(TP-S), THEIPA-Point-F(TP-F), TAWGK, EAWGK, TAWSK

Attachment point "flat point"

Attachment points (TAPG / TPB / TAPS / TAPSK)

Welding instructions for attachment points AHK, TAPS, TAPSK and "THEIPA" Point-S (TP-S)

The Range of Lifting Points
The new generation of attachment swivel - 25% higher working load
THEIPA Point
THEIPA Point TP-S
WLL Table
With the new WLL tables, you can find the right THEIPA Point attachment swivel or >flat point< for your application, and by the red marking on both sides you can measure disposal stage of the THEIPA Point.
THEIPA Point TP-S
Attachment Swivel TAWGK
Flat Point
TAPS
TAPKS
TAPG
TPB
Choose a product below
  • THEIPA Flat Connector
  • THEIPA Block Connector
  • THEIPA Power Chain Block Connector
  • THEIPA Broadband Block Connector
JDT Mining Chain Connecting Links

JDT has developed connecting links for use with many types of mining chain. Their connectors are a result of in house design, and are subject to an ongoing development program. This program looks at all aspects of the connector, from the choice of raw material to the final quality control procedures.

The connectors are all made in house. All forging, machining, heat treatment and quality control are performed at the JDT plant in Schwerte, Germany, to better insure that the final product is able to withstand the rigors of the mining environment.

JDT offers two basic styles of connecting link:

Theipa Flat connector meets the requirements of DIN 22258 – 1. This connector when used with round link chain can be used in either the vertical or horizontal orientations. When used with flat chain it must be used in the horizontal plane only.

The Theipa Block connector meets the requirements of DIN 22258-3. (The Broadband Chain and Power Chain Versions are based on the same design concepts but are not part of DIN 22258-3.) This connector must be used in the vertical plane only.

Mining Chain Connectors
Mining Chain Connectors
Use of chain connectors
Left: Theipa Block Connector - Right: Theipa Flat Connector
Choose a product below